• Luff designed to fit around your existing Furled Headsail
• Hoisted with Spinnaker Halyard, requires no additional equipment
• Top end Premium Challenge Sailcloth Dacron
• Strong cross-cut construction
• Stainless steel cringles
• Large corner reinforcing
• UV stabilized thread throughout
• Super strong finish with hand worked leather detailing
• Available in White with Visibility Patch or Full Orange
• 2-year Warranty

Luff: 5.5'

Leech: 8.0'

Foot: 5.5'

LP: '

Area: 30.0 Sq Ft

Material: 7.0 Ounce Dacron

Print the downloadable version of the measurement guide you need to organize your measurements. 

• Mainsail Measurement Guide
• Headsail Measurement Guide
• Downwind Sail Measurement Guide
• Mainsail Cover Measurement Guide
• Mainsail Boom Bag/Lazy Bag Measurement Guide
• Jib Cover Measurement Guide

For custom sails,  follow all of the steps and be detailed and specific about your requirements including hardware and tack pin set back. For stock sails focus on the basics; dimensions, cloth weight, and luff types on headsails. Then perform a search by luff length leaving boat type “Unspecified”.  A close fit is good but an exact fit is not necessary.  Measure according to the instructions below and fill in the boxes. Please be conservative when ordering and allow a few inches for stretch or error. A little short is fine but too long can be a problem.

Measuring

It is best to measure the sails on the boat.  If the sail is not available, you can also measure the rig of the boat.  Measuring sails that are not stretched to the proper tension will result in faulty measurements.  Please do not measure on the ground.  If you have any questions, please contact us at Mike@RollyTaskerNA.com or 831-646-5346.

Mainsails:

You will need to measure the Luff, Leech, Foot, Luff and Foot Attachments and Tack Pin Setback.  For complete measurement guide and direction click HERE.

Headsails:

You will need to measure the Luff, Leech, and Foot. You will also need to indicate whether you use hanks or luff tape to attach your sail to the forestay.  If you use luff tape, please indicate the size.  For complete measurement guide and direction click HERE.

Symmetrical and Asymmetrical Spinnakers:

You will need to measure the Spin-I, J and sheet attachment points. For complete measurement guide and direction click HERE.

Canvas and Accessories

You will need to measure your covers to insure proper coverage of your sails.  

• Mainsail Cover Measurement Guide
• Mainsail Boom Bag/Lazy Bag Measurement Guide
• Jib Cover Measurement Guide

Before you measure your sails, it is recommended that you give us a call and we can talk you through the process.  Please call at (831) 646-5346 or email at Mike@RollyTaskerNA.com